关于USB配置问题
现有一USB设备，而且有他的驱动程序。我现在想知道怎么去配置这些参数现他驱动的INF如下：
;; Rigolusb.inf
;; *********PLEASE READ ***********
;; The wizard cannot create exact INF files for all buses and device types.
;; You may have to make changes to this file in order to get your device to
;; install. In particular, hardware IDs and logical configurations require
;; intervention.
;;
;; The Windows DDK documentation contains an excellent INF reference.
;--------- Version Section ---------------------------------------------------
Signature="$Windows 95$"
Provider="Rigol Technologies"
; If device fits one of the standard classes, use the name and GUID here,
; otherwise create your own device class and GUID as this example shows.
Class="USB Test and Measurement Device"
ClassGUID={ff646f80-8def-11d2-9449-00105a075f6b}
; "68" is the ASCII code for "D" and is compliant with other Rgiol drivers:
DriverVer=08/13/2005,68.1.0.0
;--------- SourceDiskNames and SourceDiskFiles Section -----------------------
; These sections identify source disks and files for installation.They are
; shown here as an example, but commented out.
;
;1 = "Install Disk",Disk1,,
;
;Rigolusb.sys = 1
;Rigolusb.inf = 1
;--------- ClassInstall/ClassInstall32 Section -------------------------------
; Not necessary if using a standard class
; 9X Style
Addreg=Class_AddReg
; NT Style
Addreg=Class_AddReg
HKR,,,,"Rigol USB Test and Measurement Device"
HKR,,Icon,,"-20"
;--------- DestinationDirs Section -------------------------------------------
Rigolusb_Files_Driver = 10,System32\Drivers
;--------- Manufacturer and Models Sections ----------------------------------
%MfgName%= RIGOL Technologies
;%DeviceDesc%=Rigolusb_DDI, USB\VID_0400&PID_05dc
%DeviceDesc%=Rigolusb_DDI, USB\Class_FE&SubClass_03&PROT_00
%DeviceDesc%=Rigolusb_DDI, USB\Class_FE&SubClass_03&PROT_01
;---------- DDInstall Sections -----------------------------------------------
; --------- Windows 9X -----------------
; Experimentation has shown that DDInstall root names greater than 19 characters
; cause problems in Windows 98
CopyFiles=Rigolusb_Files_Driver
AddReg=Rigolusb_9X_AddReg
DriverVer=08/13/2005,68.1.0.0
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,Rigolusb.sys
HKR, "Parameters", "BreakOnEntry", 0x00010001, 0
; --------- Windows NT -----------------
CopyFiles=Rigolusb_Files_Driver
AddReg=Rigolusb_NT_AddReg
Addservice = Rigolusb, 0x00000002, Rigolusb_AddService
DisplayName = %SvcDesc%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 3 ; SERVICE_DEMAND_START
ErrorControl = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary= %10%\System32\Drivers\Rigolusb.sys
HKLM, "System\CurrentControlSet\Services\Rigolusb\Parameters",\
"BreakOnEntry", 0x00010001, 0
; --------- Files (common) -------------
Rigolusb.sys
;--------- Strings Section ---------------------------------------------------
ProviderName="Rigol Technologies"
MfgName="Rigol Technologies"
DeviceDesc="Rigol USB Test and Measurement Device"
DeviceClassName="USB Test and Measurement Device"
SvcDesc="Rigol USBTMC" 兄弟,你这个是RIGOL的示波器还是其他的仪器啊?
我用过DS1102CD
哪个USB驱动好象是用来和他们的上位机软件相连的
还有一个是动态连接库
可以在LV里面调用的 我用的是他们的万用表，我知道他有个自带的DLL文件，可以用API来操作。但容易出问题，而且很麻烦；如果能配置VISA 的USB是最好了，就不用那么麻烦了 难道都没人懂得配置吗?
页:
[1]