cqj 发表于 2009-4-10 23:20:54

急找NISCOPE的相关资料

请问各位谁有关于NISCOPE的资料吗？最好是有关编程方面的！由于在这方面的书籍很少，对于这方面的编程知识很缺乏，所以只能招大家帮帮忙，拜托了！！先谢谢大家了！！！

cpubbs 发表于 2009-4-10 23:39:38

转贴一个来自NI的例子！

This example uses the niScope driver to perform a single configured acquisition off of a single channel.The acquisition will start on an analog edge and this start will cause a 5 V TTL trigger to be exported on a desired PFI/PXI Trigger/RTSI Line.The niScope Export Trigger VI can be found under Measurement I/O»NI-SCOPE»Triggering»niScope Export Trigger.vi.

http://decibel.ni.com/content/servlet/JiveServlet/downloadImage/102-2350-3-1709/niScope+Export++Trigger.jpg

This screenshot of the block diagram shows the export trigger VI.

cpubbs 发表于 2009-4-10 23:40:08

点击下载例子！

cpubbs 发表于 2009-4-10 23:58:41

第二个：


NI Scope Synchronization With DAQmx Analog Output版本 3




Requirements: Application Software: LabVIEW Professional Development System 8.6
Driver Software: NI-SCOPE 3.4
Hardware Family: High-Speed Digitizers (Scopes)

Functional Description

This example shows how to synchronize an analog acquisition task using NI Scope with an Analog Output task using NI DAQmx on a PXI system.
The master task is the analog input which exports a Reference Trigger Signal on the PXI TTL 1 line. The slave task, the Analog Output,is configured with a Digital Trigger on the PXI TTL 1 line, so these two tasks become synchronized because they share the same trigger signal (PXI TTL 1 line)


Caveats and Additional Notes

Software Used: LabVIEW 8.6, NI DAQmx 8.8, NI Scope 3.4.1


http://decibel.ni.com/content/servlet/JiveServlet/downloadImage/4059/FP.JPG
http://decibel.ni.com/content/servlet/JiveServlet/downloadImage/102-4296-3-4060/BD.JPG

cpubbs 发表于 2009-4-10 23:59:24

点击下载！

cqj 发表于 2009-4-15 20:49:22

谢谢！请问你还有用NIscope做的有关连续采集的例子吗？
页: [1]
查看完整版本: 急找NISCOPE的相关资料